Phone answered 24/7 · Katy, TX and nearby communities

Call 24/7: (832) 979-5241
Katy Prairie Dry-Out ProsWater Damage Help · Katy, TX

What Are the Signs of a Slab Leak Under My House?

Last updated October 31, 2026

The short answer

Unexplained Increases in Your Water Bill

A sudden and persistent rise in your water bill, without a change in your household usage, is a major red flag. A slab leak can waste hundreds of gallons daily, leading to significant cost increases. Compare your current bill to the same period last year to spot a trend. If the spike is consistent, it strongly suggests a hidden water loss somewhere in your plumbing system.

Other common causes, like a running toilet, should be ruled out first. Check all visible fixtures for drips and listen for toilet tank refills. If everything appears normal, the leak is likely concealed. In a humid subtropical climate with hot humid summers and a Gulf hurricane season, soil movement can stress pipes, making slab leaks more probable over time.

Sounds and Sensations in Your Home

Hearing the sound of running water when no faucets, appliances, or toilets are in use is a classic indicator. This sound may be faint and heard best at night when the house is quiet. Place your ear against walls or floors to help locate the noise. The sound is caused by water escaping the pipe under pressure and flowing into the ground beneath your slab.

You might also feel unusual warmth on sections of your floor, particularly if the leak is in a hot water line. In cooler weather, a damp or mysteriously warm tile or concrete floor area is suspicious. In some cases, you may even hear a hissing sound accompanying the running water. These sensory clues are direct evidence of active water movement where there should be none.

Visible Damage to Floors and Walls

Water from a slab leak will eventually migrate upward, causing visible damage. You may notice damp spots, warping, or buckling in hardwood, laminate, or vinyl flooring. Carpeted areas might feel persistently damp or develop moldy odors. The moisture seeks the path of least resistance, often traveling along the slab to find a weak point in the flooring material.

Cracks in your interior walls, especially where they meet the ceiling or floor, can signal foundation movement. This movement is often triggered by the soil expanding as it becomes saturated from the leak. Doors and windows that suddenly stick or won't close properly are related signs. This type of damage indicates the leak has been ongoing long enough to affect the home's structure.

Checking Water Pressure and Meter

A noticeable drop in water pressure from your faucets or showerheads can indicate a slab leak. The leak creates a parallel path for water, diverting pressure away from your fixtures. This is often more apparent when using hot water if the leak is on the hot water line. If your water pressure was once strong and is now weak, it warrants investigation.

You can perform a simple test using your home's water meter. Ensure no water is being used inside or outside. Locate your meter and watch the small dial or indicator. If it moves, you have a leak. Write down the meter reading, wait two hours without using water, and check again for confirmation.

What to Do If You Suspect a Leak

If you observe multiple signs, act quickly to prevent further damage. Your first step should be to locate your main water shutoff valve and know how to use it. Shutting off the water can stop the flow and limit the damage while you arrange for help. This is a crucial step before any professional assessment or repair can begin.

Contact a qualified plumber to diagnose and repair the leaking pipe. Simultaneously, water damage under the slab can saturate flooring and subflooring, requiring drying. For the resulting water damage cleanup, local water damage pros have equipment to dry affected areas and check for mold. Policies vary, and your insurer decides what is covered.

  • Locate and test your main water shutoff valve immediately.
  • Call a plumber for leak detection and pipe repair.
  • Contact water damage restoration professionals for drying and damage mitigation.
  • Document all damage with photos for your records.
  • Review your homeowner's insurance policy and contact your agent.
  • Move valuable items and furniture away from damp flooring.

Water damage does not wait

Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.

Call Now (832) 979-5241

Frequently asked questions

Can a slab leak cause mold?

Yes, constant moisture under your home creates ideal conditions for mold growth. Mold can develop on the underside of flooring, inside walls, and in the substructure. If you smell a musty odor or see mold, a mold assessment may be needed after the leak is fixed and the area is dried.

How is a slab leak found and fixed?

A plumber uses specialized electronic listening devices, pressure tests, and sometimes video inspection to pinpoint the leak. Repair methods include rerouting pipes above the slab or performing a spot repair. The chosen method depends on the leak's location, pipe material, and your home's construction.

Who handles the water damage from a slab leak?

After the plumber fixes the pipe, the pros manage the cleanup. They extract standing water, use industrial dehumidifiers and air movers to dry structures, and sanitize affected areas. They can also assess materials like flooring or drywall that may need repair or replacement.

Call Now (832) 979-5241